1. Hold MODE and SET for one second.
The bars around the display rise and fall depending on
how much heat you provide. Put your PowerWatch on a
friend’s wrist, observe as the bars rise, then thank them
for donating their calories to charge your battery!
MODE button
SCROLL knob
SET button
MATRIX POWERWATCH
The SmartWatch Powered by You!
SET DATE & TIME MANUALLY... ...OR PAIR WITH YOUR SMARTPHONE REAL TIME ENERGY HARVESTINGTURN ON
1 21 2
1. From Welcome, press MODE.
2. Use SCROLL and SET to set the time and date.
1. Download & launch iOS or Android app.
2. From Welcome screen, press SET.
Set Date and Time is also available under “Watch Settings”
POWER & BACKLIGHT
PowerSave Mode:
The PowerWatch measures your steps and activity.
After about 45 minutes of inactivity, the PowerWatch will
automatically enter PowerSave mode and turn o the
screen. If fully charged, your settings should be saved for
one year or more. When the PowerWatch detects activity,
it will turn on again.
Keeping the PowerWatch Charged:
The PowerWatch charges whenever you wear it.
It charges even faster on the inside of your wrist.
Turn On Backlight:
Hold MODE for two seconds.
To Next Page
Need help?
General