The following settings are exported/imported:
Exporting settings to a USB drive
Once one console is fully configured for a site (the “Source Console”), its settings can be exported to a
USB drive and used to set up additional consoles identically.
To export console settings to a USB drive:
1. Prepare a USB drive.
2. Set up the Source Console with every setting and configuration change desired on all consoles.
3. Touch and hold on the Matrix logo, top center of the display to access the Product Dashboard.
4. Touch the “Machine Selection” button.
5. Type “3 0 0 1 enter” on the keypad that appears.
6. Touch on the “Management” tab.
7. Touch on “Export Settings To USB”.
8. When dialog box stating “Settings exported to disk” appears, USB drive can be removed.
All Source Console settings are stored on the USB drive, ready to be imported by other prepared
consoles.
To Next Page
Loading...
