Service and Special Functions
Machine Selection
Machine Selection tells the console what frame modality it’s installed on, ensuring proper
communication & workout function. Some settings are restored to factory defaults and re-configured
during setup. Completing Machine Selection is also necessary when the console is moved from one
frame to another.
To complete Machine Selection, follow these steps:
1. Touch and hold on the Matrix logo, top center of the display to access the Product Dashboard.
2. Touch the “Machine Selection” button.
3. Type “3 0 0 2 enter” on the keypad that appears.
4. Set up the console as though it is brand new; refer to Console Setup.
Restore Factory Defaults
Restoring factory defaults on the console ensures that all important settings are defaulted to their
factory settings, serving as a troubleshooting step to set the console to a known state. All settings,
frame selection, Wi-Fi networks, etc are forgotten.
The following settings are returned to their noted default values:
To Restore Factory Defaults:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Press the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “General” tab.
5. Touch on “Restore Factory Defaults”.
To Next Page
Loading...
