Matrix TOUCH - Page 49

SERVICE AND SPECIAL FUNCTIONS
Table of Contents
Touch / TouchXL Console
49
Troubleshooting Guide
When the updates are complete, the console may reboot and will resume normal function on the
default home screen.
Energy Saver setup
To enable, disable, and configure Energy Saver mode:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Press the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “Hardware” tab; scroll to “ErP”.
5. Set Energy Saver to Off, Idle Timeout, or Time.
6. Set time out time or time of day to enter Energy Saver mode.
RFID setup
To disassociate an RFID device from an xID:
1. Access the Product Dashboard by touching and holding on the Matrix logo, top center of display.
2. Press the “Machine Settings” button.
3. Type “3 0 0 1 enter” on the keypad that appears to access Machine Settings menu.
4. Touch on the “Hardware” tab.
5. Scan the RFID device over the RFID scanner.
6. Touch the “Disassociate RFID” button.
The RFID device is now disassociated from the xID.