Matrix U7x - Page 17

32 33
Z12
Z11
Z13
Z51
G12
6
2
2
SPRI NG WASHE R
Z12
4
SPRI NG WASHE R-CHROM E PLATED
Z52
4
BUTTON HEAD HEX SOCKET
CAP SCREW WITH NYLOC(M5x12L)
Z51
4
2
Z13
4
Z11
BUTTON HEAD SCR EW(M5x10L)
BUTTON HEAD HEX SOCKET CAP SCREW(M8x25L)
ASSEMBLY STEP 4
A Open WHITE HARDWARE BAG.
B Attach MANUAL INCLINE LIFT LEVER to GUIDE
RAIL SET using 4 BOLTS (D), 4 FLAT WASHERS
(E), 4 SPRING WASHERS (F) and 4 NUTS (G).
C Align GUIDE RAIL SET with MAIN FRAME as
shown.
D Lift up on the MANUAL INCLINE LIFT LEVER
and place it in one of the holes inside the MAIN
FRAME.
E Attach the GUIDE RAIL SET to the MAIN FRAME
using 4 BOLTS (G), 4 FLAT WASHERS (H), 4
SPRING WASHERS (I) and 4 NUTS (J).
WHITE HARDWARE BAG CONTENTS
ASSEMBLY STEP 3
A Open YELLOW HARDWARE BAG.
B Attach the STABILIZER TUBE to the MAIN
FRAME using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 ARC WASHERS (C) on
each side.
BUTTON HEAD HEX SOCKET CAP SCREW W/ NYLOC(M8x20L)Z31 4
SPRI NG WASHE RZ32 4
FLAT WASHE RZ33 4
YELLOW HARDWARE BAG CONTENTS :
Z33
Z32
Z31
bikes_om_r1.5.indd 32-33 9/9/11 8:19 AM