Matrix VS-S13 - Arm Assembly

11
PART 2: ARM ASSEMBLY
STEP 1 | RIGHT & LEFT ARM ASSEMBLY INSTRUCTIONS & NOTES
ID DESCRIPTION QUANTITY
12 Right Arm Assembly 1
13 Left Arm Assembly 1
14 40mm Diameter Washer 4
15 Belleville (Spring) Washer 2
16 M10 X 30L SHC 2
17 20 mm Diameter Shaft 2
ASSEMBLY
Attach the arms to the frame using the hardware shown, but DO NOT FULLY TIGHTEN
Belleville washer item 15 must be assembled with inner (convex) diameter contacting the bearing.
The outer diameter and concave side of Belleville washer contacts the outer washer item 14.
14
17
12
15
13
14
16
14
17
15
16