30 Matrox GXM – User Guide (Mac version)
If your monitor has a DVI connector, use a
DisplayPort to DVI adapter (sold
separately) to connect your monitor to the
connector.
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Installing your Matrox PowerDesk software”, page 40).
Connecting two monitors
Connection overview
Step-by-step connection setup
1
Turn off computer
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
Monitor cable
(DVI)
DisplayPort to DVI
adapter
To Next Page
Loading...
