Matrox
®
QuadHead2Go
™
Series Configuration Guide
43/48
1 Place
#
(
#
)
QuadHead2Go units in a 1x4 configuration. These fill all
but the bottom 3 rows of monitors.
2 Place # units in a 1x3 configuration in the
bottom 3 rows.
Example:
Every QuadHead2Go uses at least 3 out of 4 possible outputs. The
GPU needs to supply only two different resolutions.
C3. If (Columns % 4 = 3 AND Rows % 4 = 1)
7x5, 7x9, 11x5, 15x9, 19x21, 99x101, etc.
4
1 Place
#
(
#
)
QuadHead2Go units in a 1x4 configuration. These fill all
the rows of monitors except the bottom row.
2 Place
#
units in 4x1 configuration in
the bottom row.
To Next Page
Loading...
Need help?
General
