FEATURES
• Solid state design means no moving parts to fail
• Fully user programmable to set voltage and time delays
• User programmable to set as either normally open or normally closed
• Isolated design means circuit cannot ‘backfeed’
• Isolation between control and load circuits
• LED indicators and display
• Alarm output for remote peace of mind
• Water and dust resistant enclosure
• Can be mounted in any orientation
• Over temperature protection
• Separate emergency over-ride connection
• 5 year warranty
WARNING
• Make sure you are familiar with the operation and installation
requirements of the MPVSR before installing or using.
• Please take into account the environmental limitations of the product.
The device is water and dust resistant, but is not designed to be
installed in wet or excessively dusty environments. These inuences
may shorten the life of the product and are not covered by warranty.
• Never leave the load terminals uncovered, there is a high risk of short
circuit, which may damage the device and it’s surroundings, including
people.
• The device should not be operated by children.
• Electricity can be dangerous! Short circuits can create sparks which
will ignite any present ammable substances. It is critical to ensure the
unit is installed in a well ventilated area AWAY FROM ANY SOURCES
OF FLAMMABLE SUBSTANCES. This includes batteries and fuel!
To Next Page
Loading...