matson RA3800 - MAC02 Charger; Charger Overview and Operation

MAC02 Charger
General
The MAC02 Battery Charger is a fully automatic microprocessor controlled battery charger / maintainer.
MAC02 Basic Operation
1.
Ensure the MAC02 and the RA3800 are switched OFF before plugging MAC02 into the RA3800
2.
Turn the RA3800 12V / OFF / 24V switch to the 12V position for charging.
3.
Plug MAC02 charger into 240VAC and switch power on
4.
Plug MAC02 male plug into the 12VDC socket on the front of the RA3800
5.
MAC02 starts charging when it senses the battery voltage. CHARGING LED is solid red.
6.
ABNORMAL LED ashes amber if the MAC02 detects a problem with the battery.
7.
When the battery is fully charged - CHARGE LED is solid green.
RA3800 | 20150211
8