EasyManua.ls Logo

Max-Ability PRESSALIT 1000 - Cleaning; Disinfection

Default Icon
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
en
Cleaning
Clean the shower table after each use. Use ordinary soapy water. Rinse off
with fresh water and dry with a soft cloth.
IMPORTANT
Do not use an autoclave or other type of steam cleaner.
Avoid aggressive cleaning agents containing acids or chloride.
Never spray the shower table directly with a high pressure cleaner.
Avoid use of aggressive, abrasive, corrosive or chloride-based cleaning
or disinfecting products.
Disinfection
When using the shower table for multiple patients, it is necessary to both
clean and disinfect the shower table between uses on different patients to
prevent the risk of cross infection.
A list of suitable cleaning agents and disinfectants can be found at www.
pressalit.com
!
CAUTION
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.
800.577.1555 info@max-ability.com
www.max-ability.com