13
Maintenance
Expected service life of the shower table is 10 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the shower table to its full height, and then
lowering it to its lowest position, so that the internal parts are lubricated.
It is recommended that maintenance inspection is done once a year.
Disconnect mains before
removing the covers.
Maintenance inspection
• Check the hinges ① on the shower table and the safety rail ② . Tighten if
necessary.
• Check the canvas ③ for damage and replace if necessary.
1
1
3
2
2
800.577.1555 info@max-ability.com
To Next Page
Loading...