Max-Ability PRESSALIT 1000 - Page 14

14
en
4
4
4
4
• Remove the upper and
lower retaining screws ④
on the cover and remove it
carefully.
• Check the wall brackets ⑤
and tighten if necessary.
• Oil moving parts,
especially the sliding
brackets ⑥.
• Check all electrical
connections to the control
box ⑦.
• Put the unit cover back
again and tighten the
retaining screws.
• Reconnect mains.
5
5
5
5
7
6
6
800.577.1555 info@max-ability.com
www.max-ability.com