Need help?Do you have a question about the Max HN90 and is the answer not in the manual?
General| Tool Type | Framing Nailer |
|---|---|
| Operating Pressure | 70-120 psi |
| Nail Size | 2 - 3 1/2 in |
| Nail Diameter | 0.131" to 0.148" |
| Air Inlet | 3/8 in |
Essential safety measures including eye and ear protection, air supply, pressure limits, and handling flammable substances.
Guidelines on fastener handling, trigger use, discharge outlet, work surface application, and maintenance checks.
Safety advice for elevated use, tool controls, free space operation, and general cautions for tool handling and storage.
Identification of tool parts and detailed specifications including dimensions, weight, and capacity.
Details on nail length, shank diameter, shank type, and head diameter for various collated and welded fasteners.
Information on noise, vibration levels, and typical applications for the framing tool.
Guidelines on using only air compressors, operating pressure ranges, avoiding flammable substances, and proper connections.
Pre-operation checks including safety gear, screw tightness, air supply connection, and leak checks.
Ensuring hand safety, proper nail loading procedures, and magazine adjustment for operation.
Procedures for testing the tool's functionality and identifying contact and sequential trip mechanisms.
Explanation of contact fire, sequential trip operations, and the anti-double fire mechanism.
Instructions for adjusting driving depth, using the trigger lock, and attaching/detaching the contact tip.
Specific instructions for using the tool on light gauge steel plates, including fastener selection and safety warnings.
To Next Page
