P.06
Kind Reminders
* If the product has been used for long, please check the conditions as below:
- Burnt smell.
- Unstable power supply after contact with the power cord.
- Power cord heating up.
- Power cords damage.
- Other abnormalities.
CAUTION
- If above mentioned happens, please stop using the product.
- Switch off the power supply, pull out the plug, and contact us.
- Do not disassemblee the product by yourself.
CAUTION
- Do not pull the plug from the socket with wet hands.
- Please do not rinse the product. Avoid water/ liquids from getting into
the product.
- Do not use corrosive cleaning agents like benzene or thinner to clean
the product, otherwise, the color of product will fade, and the internal
parts may be corrupted or broken.
- Do not disassemble the product when it is humid. Simply let it dry.
CAUTION
Cleaning and Maintenance
Cleaning
- Before cleaning, please make sure the switch has been turned off and the power
plug has been disconnected from the socket.
- Use soft cloths to clean the surface of product and control panel.
Maintenance
- Make sure that the plug has been disconnected from the socket before
maintenance.
- Keep the product clean and away from high-temperature/ humid areas, or any
environment with volatile gases.
- If this product is to be left idle for long, properly cover it with a dust cover
(self-purchase).
Please keep the product away from direct sunlight, or high temperature, to
avoid fading or product damage.
To Next Page
Loading...