PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1. In on-hook state, press and hold ALARM/P key for 3 seconds, LCD displays DATE OFF,
2. Press ALARM/P key again, LCD displays DATE ON,
3. Press SET key to quit.
NOTE: DATE OFF: Does not allow real time auto adjustment
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
Reviewing
In on-hook state, press OUT/× key, then repeat to press OUT/× to review outgoing numbers
one by one.
Calling back
1. In on-hook state, press OUT/× key to review the desired number, then press key or pick
up the handset, and the number is dialed out,
2. Or press REDIAL key, LCD displays PICK UP, press key or pick up the handset, the
number is dialed out.
Deleting
1. In on-hook state, press OUT/× key to scroll to the desired number.
2. Press DEL key and the number is deleted,
3. Or press and hold DEL key for 3 seconds, all numbers will be deleted.
TIMER FUNCTION
Pick up the handset or press key and dial a number, then press DEL key, the unit will start to
time at once. Otherwise it will time after 6 seconds automatically.
SETTING MENU
Setting date & time
1. In on-hook state, press SET key, the value for the year flashes.
2. Press UP/+ or DOWN/– key to edit the year.
3. Press SET key to confirm and enter the next value month setting.
4. Repeat the above steps for month setting.
5. Repeat the above steps for date and time setting.
Setting Local Area Code and Long Distance Code
1. After setting up the date and time, press SET key. LCD displays CODE 0 ----- and the long
distance code “0” flashes,
2. Press UP/+ or DOWN/– key to edit the flashing code,
3. Press SET key to confirm and enter the next flashing code setting.
4. Repeat the above steps for the rest code setting.
To Next Page
Loading...
Need help?
General