Maxcom MM916 - 4 Using the Phone; Switching on the Phone; Switching off the Phone; Idle Mode

19
4. Using the Phone
4.1 Switching On the Phone
Press and hold „red receiver”, to switch on the
phone. The battery cover must be properly
locked and screwed. If there is a prompt for PIN
on the LCD, you must enter it. You will find the
PIN in the SIM Card starter kit.
After entering the code, press OK to confirm.
4.2 Switching Off the Phone
To switch off the phone, press and hold the End
Call key (red receiver).
4.3 Idle Mode
If the phone is switched on, but it is not actively
used, the phone goes to Idle mode.
LCD Description:
Warning: If you enter an incorrect PIN three
times in a row your SIM card will be locked.
The card might be unlocked by entering the
PUK (PIN Unlock Key) code. If you enter the
incorrect PUK ten times, the SIM card will be
permanently locked.