24. SAR Information
This telephone meets all international standards
pertaining to the impact of radio waves. The
product both receives and emits radio waves. It is
intended to meet all safety requirements
pertaining to impact of radio waves
recommended by international guidelines. These
guidelines were developed by the International
Commission on Non-Ionizing Radiation
Protection (ICNIRP), an independent scientific
organization with a safety margin to protect all
people regardless their age and health condition.
Such guidelines use a unit of measurement
called Specific Absorption Rate (SAR) – actual
absorption.
As recommended by ICNIRP, the border value of
SAR for portable equipment is 2,0 watts per
kilogram (W/kg). SAR value is determined at the
maximum transmit power; the actual SAR value
while the product is working is usually lower than
the indicated level. Such discrepancies result
from automatic changes in device power
necessary to ensure that the device operates at a
minimum power level required to be connected
with network.
Although SAR values might vary for different
models of phones or even for different positions
of the same model, they are all compliant with
regulations pertaining to safe level of radiation.
To Next Page
Loading...
