Maxfire CROSSFIRE LCD - Page 2

Crossfire LCD - Installation and Programming Manual
2
Version 1.5 | Revision B | May 2012
Index
Introduction
3
Before Installation
3
Package Contents
3
Notes for Installation
3
Protection against transitory interference
3
Cleaning And Location
3
Installation
4
Recommendations
4
General
5
Connections
6
System Startup
8
Status LED’s
8
Programming mode
11
Programing - Level 3
12
Zones
14
Test Mode
14
Program Code
14
Language
15
Installer Menu
15
Keyboard Key
15
Default Values
15
Reset
16
Specifications
16
Installation Record
17
Warranty Policy Certificate
18
Wiring Diagram
19
Crossfire control panels are manufactured accordingly to the European directives.
These control panels f ll all the requirements of EN54 part 2 and 4.
The control panel shows a CE sign which means that the equipment f lls all the requirements of the followiong
European directives:
Electromagnetic compatibility directive 89/336/EEC (and the directive of the 92/31/ECC, 93/68/EEC ammend)
Low tension directive 73/23/EEC (and the directive of the 93/68/EEC ammend)
The manufacturer reserves the right to modify the specs, design and data of this manual without further notice.