12
Rethread Harness Strap
Into Correct Shoulder
Harness Slots For Your Child
Make sure the shoulder harness
slots in the pad are correctly lined
up with the same shoulder harness slots in the shell. For
Rear-Facing child fit, see page 10.
4
Attach 1st Harness Strap
Loops to Splitter Plate
The sewn ends of the harness
strap loops must face towards you.
Do not twist the harness strap or
the harness adjustment strap.
Make sure the same harness
strap loops are fitted completely
on both sides of the splitter plate.
5
Check your child’s fit often. If you cannot achieve a
snug harness fit for your child, see pages 16-19.
To learn how to check harness tightness, see pages
26-28.
Check the harness straps often for any wear or
damage.
To Next Page