Maxi-Cosi 30 - Page 25

19
Attach 2nd Harness Strap
Loops to Splitter Plate
As Shown
The sewn ends of the harness
strap loops must face towards
you.
Do not twist the harness strap or
the harness adjustment strap.
Make sure the same harness
strap loops are fitted completely
on both sides of the splitter plate.
sewn
end
sewn
end
9
Check your child’s fit often.
To learn how to check harness tightness, see pages
26-28.
Check the harness straps often for any wear or
damage.
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.