27
Attach Harness Adjustment Strap
Loop to Shell
Pull the pad up at the front of the shell.
The end of the harness adjustment strap
has a loop. Slide one side of the loop
onto one tab and the other side on the
other tab. Replace the pad over the front of the shell.
Check Harness Tightness
Try to pinch the harness at the
shoulders vertically between index
finger and thumb as shown.
If your fingers slip off, the harness is
tight enough.
Position Chest Clip
Slide the chest clip up the harness
straps and position it at mid-chest
(even with armpits) and away from
your child’s neck.
7
6
5
If you can pinch the harness strap, tighten more.
A snug strap should not allow any slack. It lies in a relatively
straight line without sagging. It does not press on the child’s
flesh or push the child’s body into an unnatural position.
To Next Page