33
Switchable Retractor
(most vehicles have this type)
This retractor can be switched to a locking mode.
You must have the retractor in the locking mode to use
the seat belt with this car seat.
Switching to locking mode: Slowly pull the shoulder belt
all the way out, then let it go back in 1-2 in. (2.5-5 cm).
As it goes back in, you will most likely hear a ratcheting
sound.
Gently pull the belt to see if it has locked. You will not be
able to pull any more belt out if the lock has engaged.
Types of Retractors
3
Check Retractor
Retractors pull seat belts into
stored positions and lock the belt
to hold passengers in place.
See the next page for some
common types of vehicle belt
retractors that will work with this
car seat.
To Next Page