Maxi-Cosi 30 - Page 73

Attach 1st Harness Strap
Loops to Splitter Plate
The sewn ends of the harness
strap loops must face towards you.
Do not twist the harness strap or
the harness adjustment strap.
Make sure the same harness
strap loops are fitted completely
on both sides of the splitter plate.
67
sewn
end
sewn
end
10
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 16-19.
To learn how to check harness tightness, see pages
26-28.
Check the harness straps often for any wear or
damage.
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.