Maxi-Cosi Romi - Forward-Facing Installation Checks; Tightening the Tether Strap; Checking Belt Tightness and Movement

28
Check Belt Tightness
Hold the Forward-Facing
Belt Path with your non-
dominant hand. Push and pull
from side to side.
The car seat should not move
more than 1 in. (2.5 cm).
If the car seat
moves more than 1 in.
(2.5 cm), you can try:
• Pulling the belt
tighter; OR
• Reinstalling the car
seat; OR
• Changing to a
different seating
location; OR
• Switching to a
different install
method (LATCH or
vehicle belt).
10
Tighten Tether
Push firmly on the back of
the car seat and pull the free
end of the tether strap to
remove all of the slack.
9
continued on next page