To Store Lower Anchor Belt
The lower anchor belt MUST
be properly stored in its storage
location when:
• using the vehicle belts to install
the car seat; OR
• the car seat is not installed in
a vehicle.
When installing Rear-Facing
with vehicle belt, thread the
lower anchor belt through the
Forward-Facing Belt Path as
shown.
When installing Forward-
Facing with vehicle belt, thread
the lower anchor belt through the
Rear-Facing Belt Path.
Then attach hooks to storage
attachments near the Rear-
Facing Belt Path as shown.
Gently pull the free end of the
belt to
remove slack.
52
To Remove Lower Anchor Belt from
Vehicle’s Lower Anchor Bars
1. Remove the tension from the belt by pushing down
on the side of the car seat with the adjuster.
2. Then press the adjuster’s button to loosen the belt.
3. Squeeze the spring lever on the hooks, push the
hooks back into the vehicle seat, and rotate the hooks
to the side.
4. Pull the hooks out of the vehicle seat.
DO NOT use both the lower anchor belt and vehicle belt at the same time.
WARNING:
To Next Page