FIG.6
FIG.5
FIG.1
FIG.2
FIG.4
FIG.3
3
FIG.6
FIG.5
FIG.1
FIG.2
FIG.4
FIG.3
MACHINE OPERATION
1
ST
STEP: LOWER DRUM FILLING
• Unhook the closing devices (fig.1);
• Lift the upper cover (fig.2);
• Fill the lower drum with about 2 litres of clean water (fig.3)
• Reposition the cover by paying attention to the drum level
indicator. It must be is in the front part (fig.4)
IMPORTANT:
to avoid motor damages during the
suction check that the liquid contained in the drum
does not exceed the level indicated on the drum
itself
(MAX) (fig.4) otherwise we recommend
emptying the drum.
2
ND
STEP: WATER TANK FILLING
• Remove the plug (fig.5);
• Fill the tank with water by using the suitable bottle supplied
(fig.6) and by respecting the maximum capacity of the tank
(any excessive water will be automatically discharged in the
lower drum).
• Put the plug again.
NOTE: USE ONLY THE BOTTLE SUPPLIED AND AVOID USING ANY
OTHER OBJECT SUCH AS GLASSES AND FUNNELS TO FILL THE
TANK. IT MAY BE OVERFILLED. DO NOT USE DISTILLED WATER.
WARNING: Fill the lower drum only with water.
Do not use fragrances-essential oils different
from the ones approved by the Manufacturer.
They may damage the drum.
Empty and wash the drum after each use.
To clean the drum, use natural soap and rinse
with abundant water.
To Next Page
Loading...