Spangenberg International B.V. – Rendementsweg 24P – 3641 SL Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
info@spangenberg.nl – www.spangenberg.nl
Refilling Pump 20
Replacing the Sealer
In time, the sealer will be worn down simply through usage of the machine. The sealing tape on top of
the sealer can be replaced as shown below. Of course it is also possible to replace the complete sealer,
which is done in pretty much the same way.
Release the contactpoints by removing de screws.
Remove the screws in the bottom and sides of the sealer as shown in the pictures.
To Next Page
Loading...
