Spangenberg International B.V. – Rendementsweg 24P – 3641 SL Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
info@spangenberg.nl – www.spangenberg.nl
Remove the plastic blocks on the sides of the sealer and then remove the tape.
Release the metal strip and remove the strip completely (the tools to do this have been delivered with the machine).
Cut a new heating wire at the right size, and replace the old one with it.
Use the tools to place the heatin wire and lock it in place with the retaining bolt.
Take at sealing tape a proper length and sticker it on the heating wire
To Next Page
Loading...
