Maximum Controls MAX ARM - Page 16

14
MAX Arm/Ultra Arm V1
rev 06/09/22
See page 22 for PULL OPEN installation steps.
See page 23 for
PUSH OPEN
installation steps.
B
A
C
C
59.25” Max
DO NOT Fully Extend Drive Rod
59.25” Max
DO NOT Fully
Extend Drive Rod
Closed
Option 1
Option 2
Option 3
7”
8”
7.5”
5”
6”
7.5”
Closed
Open
Open
8”
6”
Bi-parting gates using overlap/maglock:
Motor 1/Primary gate opens FIRST . Install
overlap/maglock accordingly to account for this.
When “A” and “B” are similar dimensions, smoother
gate operation and reduce motor strain occurs.
Option 1 allows fastest opening/closing time
(B dimension being MINIMUM allowed).
NOTE: Rear bracket
MUST be fabricated.
2.5”
2.5”
pull open dimensions
push open dimensions
41” Min
C1
C1
41”
Min
Option 1: 9” Option 2: 10” Option 3: 11”
Minimum distance
needed for clearance
A B
59.25”
59.25”
59.25”
C
8ft 12ft 16ft 18ft
Max Weight/
Length
1600 lbs 1200 lbs 800 lbs 600 lbs
Maximum opening range 135° with Option 1
max arm