Maximum 054-8265-4 - Operating Instructions

13
TM
MOUNTING ACCESSORIES
CAUTION: For all work or when changing accessories, always
wear protective gloves. Avoid risk of injury from the sharp
edges of the accessories. Accessories can become very hot
while working, presenting danger of burns. Make sure the
tool is unplugged prior to changing accessories.
TO CHANGE ACCESSORIES
The tool-less blade change lever allows you to change the
accessories without using a hex key.
• Flip the tool-free blade release lever forward to the open
position to loosen the flange. (Fig. A)
OPERATING INSTRUCTIONS
WARNING!
• To reduce the risk of injury, do not let the sharp side of the
accessory face back toward the user’s hand.
FPO
NOTE: Before using the tool, read the instruction book
carefully.
NOTE: The flange will need to be completely removed to install
certain accessories that do not have an open-ended connection
interface.
Open-Ended
Closed-Ended
Fig. A
Fig. B
Fig. C
Fig. E
TM