NOTE: When plunging and sawing, use a slight pendulum motion, to
allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure
an even distribution, loosen the saw blade, rotate it and retighten
firmly.
Cut/sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate—the
accessory merely wears faster.
NOTE: Accessories also work with other competitive oscillating
tools.
Function Accessory Name Application
Sawing
Bi-metal metal/wood
end cut blade
Wood, plastic, fibreglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers
Sawing
HSS semicircle saw
blade
Thin wood, plastic, fibreglass, non-
ferrous metals, thin sheet metal,
hardened fillers, window glazing
Sanding
Sanding pad Wood, plastic, hardened fillers
Removing
grout
Diamond-coated
semicircle saw blade
Ceramic and stone tile,
backerboard
Scraping
Rigid scraper blade
Old paint, hardened adhesives,
caulk, carpet
APPLICATION
The workpiece must be clamped tightly before it is cut.
UNIVERSAL ACCESSORIES AVAILABLE FROM MAXIMUM
®
To Next Page
Loading...
