10 11
model no. 054-2312-8 | contact us 1-888-670-6682
SYMBOLS
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and more safety.
No. Description
V Volts
A Amperes
Hz Hertz
W Watts
n
0
No-load speed
RPM Revolutions per minute
BPM Beats per minute
Alternating current
Direct current
Ah Ampere-hours
Li-ionn Lithium-ion battery
Ø Diameter
BFP Backfeed protection
Safety alert symbol
To reduce the risk of injury, user must read operator’s
manual.
Always wear eye protection.
Contains lithium-ion battery.
Battery must be recycled or disposed of properly.
Conforms to bear the ETL mark and complies with rele-
vant industry standards.
PARTS LIST
No. Description
1 1/2” (12.7 mm) square anvil
2 Trigger switch
3 Forward and reverse lever
4 LED worklight
5 Remaining power indicator
6 Speed selector
No. Description
7 Battery release button
8 Rechargeable battery pack
9 Charger
10 Charging indicator
11 Detachable cable and plug
WARNING!
• Remove the product and any accessories from the
package. Inspect the tool carefully to make sure no
breakage or damage occurred during shipping.
• Do not discard the carton or any packaging material
until all parts have been examined.
To Next Page
Loading...
