Maximum Dab+ - User Manual

dab+ your car Quick Guide
CONTENTS OF PACKAGE
1. dab+ your car unit 4. Power Cable with Cigarette Lighter Plug
2. FM RDS Modulator 5. Band III / L-Band Aerial
3. Remote Controller 6. Quick Guide
INSTALLATION
This is the easiest configuration to install in any car.
From External Audio Device
DABAUX
Remote Controller
Band III / L-Band
Aerial
12V DC
Connection Diagram for "dab your car"
Cigarette Lighter Extention
To Vehicle +12V DC
Power Input
Fig.1: Rear Panel of DAB Receiver dab+ your car
After the power cable is plugged into the 12V
DC jack on the dab+ your car, you need to turn
the power plug 90 degree clockwise or
counterclockwise as illustrated in Fig.2. This is
to ensure that the power cable will be firmly
connected to the dab+ your car all the time.
1
Fig. 2: Power connection with Lock Mechanism
REMOTE CONTROLLER
E
12V DC
1
2
DAB/AUX : key to switch to DAB mode or AUX mode
SCAN : key to scan DAB/DAB+ services
RESET : key to perform the system reset, change the FM Frequency
or change the FM RF Power Level
NTER : key to conform a setting, begin an operation or revert to the
original display
I◄◄ , ►►I : keys for Quick Tune
▲ , ▼ : keys for Step Tune
ENTER
▲LS▲ : key to recall the Latest Services
▼USER▼ : key to load settings of a particular user
1, 2, 3, 4 : keys to recall or set Memory Preset
RESET
SCAN
24
31
USER
LS
DAB/AUX

Maximum Dab+ Specifications

General

Brand	Maximum
Model	Dab+
Category	Car Stereo System
Language	English

Summary

Remote Controller Functions

DAB;AUX Button Function

Switches between DAB mode and AUX mode for audio input selection.

SCAN Button Function

Initiates a scan to find available DAB/DAB+ radio services.

RESET Button Function

Performs system reset, changes FM frequency, or adjusts FM RF power level.

ENTER Button Function

Confirms selections, starts operations, or returns to the previous display.

Memory Preset Buttons Function

Recalls or sets favorite DAB services into memory presets.

Starting Up the System

Set Car Radio to Default FM Frequency

Tune the car radio to 87.6MHz to match the device's default FM frequency.

Perform Initial Scan Function

Conduct an initial scan for DAB/DAB+ services before first use.

System Operation

Scanning for DAB;DAB+ Services

Scans for DAB/DAB+ services using Quick or Full scan modes.

Listening to DAB;DAB+ Services

Setting User Presets

Memory and FM Settings

Saving a Memory Preset

Recalling a Memory Preset

Setting the FM Transmitting Frequency

Advanced Settings and Reset

System Reset

Restore to Factory Settings

Remote Controller and AUX Input

Listening to Audio Programs from an External Audio Device