dust tank
(d) the bottom cover will be opened and dust be released out
automatically.
(e),close the bottom cover and press it to lock the dust tank
(f),put back the dust tank back to its place in unit. Close the front cover,
press the place where mark the “Press” on the front of front cover, to
lock the dust tank with bottom part.
NOTE:
1.Ther motor protection filter(as found under the front cover of dust
tank)/metal/nelon filter (surrounding the HEPA filter)should be removed
and rinsed
twice a year or whenever it is visible clogged. If the filter is damaged,
a new filter should be replaced. For the HEPA filter, please use a soft
bristled brush for cleaning.
2.The exhausted filter should be cleaned in time. To do that, unclip
the grille and shake the filter to clean any dust accumulated. Then
relocate the filter and clip the grille.
Power Cord Marking
To Next Page
Loading...