Maxlife MXSW-300 - Attention to Text Messages; Call and Time Synchronization Issues; Rules for Safe Use

8 9
EN EN
the next point.
- Check if there are data transfer arrows, if not, set APN (Access Point
Name - specic packet network, e.g. internet):
Please send a text message to the number of the watch with the con
-
tent: pw,123456,apn,internet,,,XXXXX#
* the X character stands for digits assigned to a specic operator
26003 – ORANGE
26001 – PLUS
26006 – PLAY
26002 – T-MOBILE
the remaining code digits are available on manual/forever.eu or www.
mcc-mnc.com/
After sending the message, wait several minutes for KidsWatch to
download the settings from the network. Data transfer arrows will
appear.
- Please send a text message to the number of the watch with the
content: pw,123456,ts#, in response, the watch will send us the
parameters of the watch. An example:
ver:G36WS_YDE_V1.1_2019.12.19_09.45.40;
ID: 1234567890;
imei:123456789012345;
ip_url:52.28.132.157;
por t:8001;
upload:600S;
bat level:96;
language:1;
zone:8.00;
ec:0;
NET:OK(73);
Check the data received in the SMS with the watch number.
- If the number ID/IMEI/REG CODE is dierent from the badge on the
watch or the bottom of the package, set a new IMEI number.
Please send a text message to the number of the watch with the con
-
tent: pw,123456,imei,xxxxxxxxxxxxxxx# where X are the numbers
from the badge - the watch, after receiving the SMS with the code,
sends back in the SMS response with the correct IMEI number, for
example: pw,123456,imei,359614514986574#
Attention
when writing text messages, pay attention to punctuation
marks and spaces. This is very important because if the cha-
racters are not used correctly, the commands will be misin-
terpreted by the watch and will remain unanswered.
Could not call watch. The signal is busy or the subscriber
does not answer
Reason: The watch does not recognize the incoming number or
the app is set to do „not disturb”.
Solution:
- Check if the number you are calling from is hidden number.
- Check if there are contact numbers in the application.
The watch only receives calls from numbers previously set in the
contacts of the application.
The watch does not show the current time and date
Reason: The watch did not connect to the application server to
update the time.
Solution:
- If the watch shows several hours back, check and select the
correct time zone via the app.
Rules for safe use
• Read and keep this manual.
• There are no user-serviceable parts inside. All repairs should be
performed by a service technician.
• Protect the device from contact with water and moisture to avoid
damage to electronic parts. Avoid very high temperatures; they
can shorten the life of electronic device components or melt pla-
stic parts.
• Note: Use only original parts / accessories provided by the ma-
nufacturer.
• Follow the instructions in the manual. The product is not a toy.