Maxmatic 5000 - General Information and Support; Product Features and Feed Types; Contact and Company Details

8
GENERAL INFORMATION
Fitted with a commercial Magnitop Magnitube Air or Wall Switch
Grinding system Batch Feed Continuous Feed Continuous Feed
5000 * * *
4000 * *
4000 Classic * *
3000 *
2000 *
Batch feed
Waste is placed in the hopper and then a Magnitop plug is used to close off access and
then turned to start the unit.
Standard Continuous Feed
The unit is started either with an electrical wall switch or bench mounted air switch,
waste is then fed continuously.
Magnitube Continuous Feed
The unit is started by twisting our patented Magnitube and waste is then fed through it.
Max Appliances Limited
Kingfi sherHouse
Wheel Park, Westfi eld
East Sussex, TN35 4SE
Tel: 01424 751666 Fax: 01424 751444
Email: sales@max-appliances.co.uk Web: www.max-appliances.co.uk
IT IS OUR POLICY TO CONTINUALLY IMPROVE OUR PRODUCTS AND WE RESERVE THE RIGHT TO
IMPLEMENT DESIGN CHANGES AT ANY TIME WITHOUT PRIOR NOTICE.
CHECK WWW.MAX-APPLIANCES.CO.UK FOR THE LATEST INSTRUCTIONS AND SPECIFICATIONS