If your Disposer Stops Working
An overload switch protects your Maxmatic disposer. This will turn off the power in the event of a
jam, overloading, or if the unit is left running for a prolonged period.
1) FIRST TURN OFF THE POWER SUPPLY.
2) If your unit has a reverse switch, select the centre “OFF” position.
3) Allow the unit to cool for a few minutes.
4) You will fi nd the RED reset button on the BOTTOM of the unit, press it with your fi nger.
5) Select either “ON” position on the reverse switch if your unit has one.
6) RESTORE THE POWER SUPPLY.
7) Try the unit.
IF THIS FAILS
8) Repeat steps 1 to 3 above
9) Insert the DE-JAM key supplied with your unit and turn in both directions until it rotates freely.
10) Remove the DE-JAM Key
11) Repeat steps 4 to 7 above.
IF THIS FAILS
12) Check that your power supply is not fused and that your air switch or wall switch is working.
13) Contact Max Appliances on 01424 751666 for more help.
WARRANTY
Providing our installation and operating instructions have been carefully observed, this waste disposer is
guaranteed to the REGISTERED original purchaser, to be free from defects in material and workmanship for
the periods specifi ed below.
Standard model Labour Parts
3000 2 years 2 years
2000 2 years 2 years
Deluxe model Labour Parts
5000 2 years 10 years service exchange
4000 2 years 10 years service exchange
4000 Classic 2 years 10 years service exchange
This guarantee does not apply to any detachable items (rubber plug, splashguard, Magnitube or Magnitop
plug), and any costs incurred in the rectifi cation of either faulty installation or jammed machines. Furthermore
this guarantee does not apply where a machine has been abused in circumstances in which we would
normally consider a commercial machine applicable (e.g. establishments providing more than 10 meals per
sitting, or on a continuous or semi-continuous sitting) If your machine is not registered within 14 days of
purchase statutory 12 months warranty will apply. Inspect product for damage during transport, as the
cost of an aborted installation visit cannot be claimed. Proof of purchase must be in registered name of
end user.
For service contact us on 01424 751666 for your nearest service agent. You will be asked
to quote the serial number to identify your machine and check registration.
7
To Next Page
Loading...