Quick Installation Guide
MAXOCAM.COM
V380 PRO
Starting the app and Account registration
1. Install the V380 Pro app from Google Play Store or Apple App Store.
2. Start the app and you will see introductory pictures. Tap "Try Now" on the last picture. Figure 1
will be shown.
3. Tap Register and tap Region selection (Figure 2). Select North America (Figure 3) and go back to
Figure 2.
4. Enter your e-mail address (this will be your account ID) and tap "Verify Code" (Figure 2 and
Figure 4).
5. A code is sent to your e-mail address. Check your e-mail and enter 6 digit code (you may have 60
seconds to do it. If you failed, tap "Verify Code" again.) and tap "Next" (Figure 4). Figure 4A will
be shown. Please enter password (numbers and letters) and tap Submit.
6. Figure 5 will be shown. Tap "Login" and then Figure 1 will be shown again. Enter your registered
e-mail address and password and tap "Login".
Now account registration is complete.
To Next Page
Need help?
General