2) Using the belt clip, affix the unit to your
belt or another convenient location. Put the
headset on, extend the antenna and adjust
to a comfortable fit. Keep the microphone ele-
ment within 1" of your mouth.
NOTE: If you choose to adapt the 49-HX headset
for helmet use, refer to the helmet installation
instructions in this manual.
3) Turn the power on and adjust the volume to a
desired listening level.
4) Select the desired channel using the channel
selector switch.
5) If you want to communicate radio to radio, set
the intercom/TX switch to TX. If you choose to
utilize the Maxon 49-HXH passenger headset
(sold separately), plug in the passenger headset
and set the intercom/TX switch to the intercom
position.
6) Position the VOX/P-T-T thumbwheel control
to either the VOX position (for hands-free, voice
activated transmissions) or the P-T-T position (for
manual push-to-talk transmissions). When using
the VOX mode, adjust the sensitivity setting to
suit your surroundings and needs. While looking
at the
9
To Next Page
Loading...