Mount the earpiece inside the helmet, positioning
it so that it will be next to your ear when wearing
the helmet. A 2" x 2" piece of hook-and-loop
fastening material is supplied for this mounting.
NOTE: Some helmets have recesses for inserting
an earpiece, or have pads which can be removed
to provide space to mount the earpiece.
INSTALLING THE REMOTE P-T-T
The radio’s remote push-to-talk button has been
designed to fit the handlebar of a motorcycle,
bicycle, snowmobile, etc. A mounting strap with
hook-and-loop fastening material has been
provided with your 49-HX.
To use the remote P-T-T: Plug into the REM
jack on your transceiver and set the VOX/P-T-T
control dial to the P-T-T position (counter-
clockwise, as far as it will go).
13
To Next Page
Loading...