2) Set the intercom/TX switch to the intercom
position.
3) Plug in the optional Maxon 49-HXH passen-
ger headset (sold separately) into the headset jack
on the top of the unit.
4) Position the VOX/P-T-T thumbwheel control
as directed in operating instructions.
NOTE: The 49-HXH passenger headset will
only communicate with the main unit headset.
However it can monitor all other unit to unit
conversations, but will not transmit. (FCC Regula-
tions).
HELMET INSTALLATION
INSTRUCTIONS
Both the headband and earpiece of the 49-HX
headset can be detached from the antenna/boom
microphone assembly. Hook-and-loop fastening
material is included with your 49-HX to enable
attaching the antenna/boom microphone assembly
to the exterior of the helmet and for attaching the
earpiece to the interior.
11
To Next Page
Loading...
