Maxon M-KIT112 - Tools Required for Assembly; Hardware Kits; Panel Hardware (PL6624 & PL6636); Corner and Rectangular Worksurface Hardware (UCS2436 TM & UWR2436 TM)

Page 3 of 13 M-KIT112/113/114 Assembly Instrucons 181-03005
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from
failure to properly assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Tools Required for Assembly
Hardware Kits
Please ensure all required pieces are present before beginning assembly. Some steps may require a second
person for assistance.
Panel Hardware (PL6624 & PL6636)
Corner and Rectangular Worksurface Hardware (UCS2436TM & UWR2436TM)
End Cap
Provided: 6
Used: 2
Top Cap Spacer
Provided: 6
Used: 4
Lock Bar
Provided: 6
Used: 2
#8 x 1/2” Phillips Flat Head
Provided: 12
Used: 4
I-Beam Panel Connector
Provided: 48
Used: 48
Straight Alignment Bracket
Provided: 6
Used: 2
#10 x 3/4” Panhead Screw
For Corner Worksurface:
Provided: 16
Used: 11
For Rectangular Worksurface:
Provided: 32
Used: 20
Aaching Bracket
For Corner Worksurface:
Provided: 2
Used: 0
For Rectangular Worksurface:
Provided: 2
Used: 2
RH Corner Bracket
For Corner Worksurface:
Provided: 1
Used: 1
For Rectangular Worksurface:
Provided: 2
Used: 1
LH Corner Bracket
For Corner Worksurface:
Provided: 1
Used: 0
For Rectangular Worksurface:
Provided: 2
Used: 1
Phillips Screwdriver
Level
Drill/Screw Gun
with Phillips bit
Rubber Mallet
Boxcuer
Tape Measure
1/2” Box End or
Adjustable Wrench
1/4” Socket Wrench
Wire Cuers