Maxon M-KIT112 - Corner Post Hardware (PLCP66); Corner Shelf Hardware (UPCS36); Systems Pedestal Hardware (SYP20 B-R)

Page 4 of 13 M-KIT112/113/114 Assembly Instrucons 181-03005
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from
failure to properly assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Hardware Kits
Corner Post Hardware (PLCP66)
Corner Shelf Hardware (UPCS36)
Systems Pedestal Hardware (SYP20B-R)
#8 x 1/2’’ Washer Head Screw
Provided: 16
Used: 6
Overhead Joining Bracket
Provided: 1
Used: 0
LH Corner Bracket
Provided: 1
Used: 0
Bridge Support Bracket
Provided: 1
Used: 0
Standard Pedestal Screw
Provided: 4
Used: 4
Standard Pedestal Spacer
Provided: 4
Used: 4
Wedge Bracket
Provided: 9
Used: 6
Angle Alignment Bracket
Provided: 9
Used: 3
Note: Brackets are shipped in
strips of 3 and must be broken
apart before using.
Raceway Corner End Cap
Provided: 3
Used: 3
Raceway 3-Way End Cap
Provided: 3
Used: 0
Corner Post Cap
Provided: 3
Used: 3
Top Cap Spacer
Provided: 9
Used: 0
Straight Alignment Bracket
Provided: 3
Used: 3
I-Beam Panel Connector
Provided: 24
Used: 16