Maxon OD808 User Manual

22
SAMPLE SETTING
GE601 No.1 (for humbucking pickup)
Setting for passive pickup bass to simulate active
pickup bass with GE601 as pre-amp. It produces
clear tone peculiar to active-type bass.
GE601 No.4 (for humbucking pickup)
Setting to cut off the middle range of humbucking
pickup to simulate sharp sound of single-coil pickup.
GE601 No.2
Setting to change single-coil pickup tone to electric
acoustic guitar sound. Cutting off the middle and low
ranges, it stresses the brightness of guitar with piezo
pickups.
GE601 No.3
Equalizing to add power to single-coil pickup tone. It
boosts up the middle range for solo.
GE601 No.5
Setting to add edge to overdriven tone of humbuck-
ing pickup.
Indistinct distorted tone in solos will be cleared.

Maxon OD808 Specifications

General

Type	Overdrive
Controls	Drive, Tone, Level
Power Supply	9V DC
Weight	580 g
Technology	Analog
Input Impedance	500 kOhms
Output Impedance	10 kOhms
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Power Source	9V Battery or AC Adapter
Current Draw	6mA at 9V