14
www.maxonamerica.com
1.
Contact List (Digital Mode Only)
The Contact List provides a list of individuals, groups or all calls of which you can make a direct
call. The lists of contacts are set within the radio by the PS. To initiate a call, select the Contacts
section from the menu (or press the contact button for direct access), press the menu/enter
button to see the list of contacts, press the
keys to the desired contact and press the PTT
button to initiate the call. The radio will revert to the original contact/channel after a preset time
as set by the PS. When you enter in the contact menu, the applicable icon will be shown
indicating the type of call.
ICON
- : Individual Contact List
- : Group Contact List
- : All Contact List
2. Messages (Digital Mode only)
The Message section offers the ability to perform one of the three functions.
Quick Text - The ability to send from a choice of 10 preset messages with up to 40 characters per
message. The preset messages are set by the PS.
Inbox - Stores up to 10 received text messages; when the received messages exceed 10, the
oldset message is cleared and the newest incoming message is registered. When a new
message arrives, the contents will be displayed on the LCD screen. When you choose messages
stored in the list, you can view the received messages and the caller ID that initiated the call.
Outbox - Stores up to 10 outgoing text messages; when the outgoing messages exceed 10, the
oldset message is cleared and the newest sent message is registered. When you choose
messages stored in the list, you can view the sent messages and the caller ID to whom they
were sent.
To obtain access, select the Messages section from the menu, press the menu/enter button to
enter into Messages and use the
keys to highlight one of the three choices:
a) Quick Text
Select Quick Text from the message menu by pressing the menu/enter button to view the
registered message(s).
Using the
keys, select the message you want to send, and press the menu/enter button
to see the contents of the message. Press the menu/enter button again to view the list of
contacts, and using the
keys, select the contact for the message to be sent. Press the
menu/enter button and the message will be sent to the contact(s). An acknowledgement will
be shown on the display of either “Sent Success” or “Sent Fail”. If the message is failed, check
to make sure that the user receiving the message has their unit powered on.
To Next Page
Loading...
Need help?
General
