15
b) Inbox
Text messages are shown initially on the screen. If you are in another mode or miss the
message, the message icon will be displayed indicating a new message(s) has arrived.
Select inbox from the message menu by pressing the menu/enter button to view the
registered message(s). Using the
keys, select the message you want to view, and press
the menu/enter button to see the contents of the messages. Messages that have yet to be
viewed will be indicated with a downward arrow inside the envelope; after a message is
viewed the arrow will no longer be shown.
If you want to delete messages from the Inbox, select #2 Delete All from within the Inbox
menu by pressing the menu/enter button, the question to Delete All will appear with the word
“Yes?” Press the menu/enter button to delete all messages. If you choose not to delete the
messages, press the return button to exit out.
c) Outbox
Select Outbox from the message menu by pressing the menu/enter button to view the
outgoing message(s). Using the
keys, select the message you want to view. At this
point, you can resend the message. Press the menu/enter button to view the contents of the
message. Using the
keys, select the message you want to send, and press the menu
/enter button to see the contents of the message. Press the menu/enter button again to view
the list of contacts, and using the
keys, select the contact for the message to be sent.
Press the menu/enter button and the message will be sent to the contact(s). An
acknowledgement will be shown on the display of either “Sent Success” or “Sent Fail”. If the
message is failed, check to make sure that the user receiving the message has their unit
powered on.
To delete messages from the Outbox, select #2 Delete All from within the Outbox menu by
pressing the menu/enter button, the question to Delete All will appear with the word
“Yes?” Press the menu/enter button to delete all messages. If you choose not to delete the
messages, press the return button to exit out.
Note - When sending and receiving text messages, turn off the power saving mode.
3. Call Logs (Digital Mode Only)
The function allows the viewing of incoming and outgoing calls from individuals only. The call log
contents are managed in the same manner as in the inbox/outbox of the messages section
(reference #2 Messages).
4. Call Recording (Digital Mode Only)
This function is used to record the content of outgoing and incoming calls in digital mode only.
There are 3 choices of Settings, Lists, and Delete All. Up to 63 conversations/recordings can be
stored with each recording limited to 150 seconds. When the recordings exceed 63, the oldest
message is cleared and the newest incoming message is registered.
Settings - This section allows the capability to turn the recording capability on or off.
To Next Page
Loading...
