To Next Page

To Previous Page

Lists - This section allows the viewing of the recorded messages and to play back each

message. To play back a message, use the

keys to the desired message and press the

menu/enter button to play the recording.

Delete All - This function provides the capability to delete stored recordings. To delete recordings,

select Delete All from within the Voice Recording menu by pressing the menu/enter button, the

question to Delete All will appear with the word “Yes?” Press the menu/enter button to delete all

recordings. If you choose not to delete the recordings, press the return button to exit out.

5. Scan

This function provides the ability to turn scan on/off and review the scan list as programmed into

the radio via the PS. The ability to scan digital and analog channels are available. Contact your

Authorized Dealer for further information.

6. Zone

Up to 16 zones (with up to 32 channels per zone) can be programmed into the radio via the PS.

To select the desired zone, press the

keys and press the menu/enter button to accept the

zone. Contact your Authorized Dealer for further information.

7. Settings

This function allows the change to the settings of Power Level, Squelch Level, Voice Operated

Transmit (VOX). Lone Worker, Busy Channel Lock (BCL)/ Busy Channel Lock Out (BCLO).

Keypad Lock, Tones, Backlight, Brightness, LED Control, Language, Screen, and

Power Save.

a. Power Level

This function sets the power transmitting level at high or low. The setting of low power improves

battery life, but diminishes talk range.

b. Squelch Level (Analog Only)

This function allows the ability to change the squelch levels of Open,1,2,3,4, or Tight.

c. VOX

VOX function allows transmitting without using the PTT button.

VOX sensitivity level is adjusted from 1 to 5 with 5 being the most sensitive.

d. Lone Worker (Digital Mode Only)

This function can inform others about your safety within the time set in the menu. Contact your

Authorized Dealer for further information.

e. BCL/BCLO

This function prevents interference when the channel is busy.

-Digital Mode Only

BCL On: If the current channel is busy, the transmission is prohibited.

Maxon TPD-8000 Series User Manual

Questions and Answers: