17
- Analog Mode
BCL On & BCLO Off: If the current channel is busy, transmitting is prohibited.
BCL On & BCLO On: Transmitting occurs when it matches the received tone.
f. Keypad Lock
This function locks the keypad to prohibit the accidental press of keys and buttons.
When the keypad lock is enabled, all keys/buttons are locked except the PTT button, the
emergency button, and power ON / OFF button. If any of these buttons are pushed, the
keypad lock will enable again after 25 seconds from the pressing of the last button.
Press the key for 2 seconds to temporarily unlock the keypad for 25 seconds.
g. Tones
This function enables or disables the tones associated with key and button presses.
Additional tone settings can be set via the PS. Contact your Authorized Dealer for futher
information.
h. Backlight
This function allows the backlight of the LCD to be turned ON/OFF and timed. The duration
for the timed section is set via the PS. Contact your Authorized Dealer for futher information.
i. Brightness
This function is to adjust the contrast / brightness of the LCD from low to high.
j. LED Control
This function is to set the enable or disable the radio status LED. The LED status can be
set via the PS.
k. Language
This function is to select the language (English or Korean) for the menus.
l. Screen Setting
This function allows the ability to change between Screen 1 for Numeric or Screen 2 for
Alphanumeric. The information displayed is set via the PS. Contact your Authorized Dealer
for futher information.
m. Power Saving Mode
This function allows the radio to enter a power saving mode to extend battery usage time.
Off is full power, 1/1 is 50% on/50% off; 1/2 is 33% on/67% off; 1/4 is 25% on/75% off.
Note: When sending and receiving text messages, turn off the power saving mode.
Additional features that can only be set and initiated through the PS.
Voice Encryption (Digital Mode Only)
This is a feature to encrypt the incoming and outgoing voice. Voice Encryption function can only
be performed through digital channels. The setting of voice encryption codes is set via the PS.
Contact your Authorized Dealer for futher information.
To Next Page
Loading...
Need help?
General
