MAXSA 40234 - User Manual

MODELS #40234
#40235
#40236
OPERATING INSTRUCTIONS
Solar Motion-Activated Wedge Light
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE
ABOUT YOUR SOLAR WEDGE LIGHT
During the day, the solar cell charge panel on this MAXSA Solar Wedge
Light converts sunlight into electricity recharging the batteries. Using this
stored energy, the LED light (built into this Solar Security Light) turns on
automatically at night when motion is detected. This MAXSA Solar Wedge
Light turns on for 4 minutes each time motion is detected in the area.
This unit includes 3 AA rechargeable batteries, which will need to be
replaced when the charging ability is decreased.

Summary

Operating Instructions

About Your Solar Wedge Light

Explains how the solar cell charges batteries and the LED light activates with motion.

Before First Time Use

Initial setup steps to ensure batteries are fully charged before operation.

Operating Your Solar Wedge Light

Instructions on how to use the motion-activated or always-on light modes.

Choosing a Location

Guidance on selecting an optimal location for sun exposure and motion detection.

How to Install Your Solar Wedge Light

Replacing the Rechargeable Batteries

General Electrical and Safety Warnings

Maintenance Tips

Storage and Cold Weather Performance

Storage

Recommendations for storing the light indoors to prevent battery damage.

Cold Weather Tips

Advice on performance and solar panel orientation in cold temperatures.

Troubleshooting

One Year Limited Warranty

MAXSA 40234 Specifications

General

Brand	MAXSA
Model	40234
Power Source	Solar
Mounting Type	Wall Mount
Material	Plastic
Color	Black
Type of Bulb	LED
Battery Type	Rechargeable
Weather Resistance	IP44
Special Features	Adjustable Light Head
Charging Time	8 hours in direct sunlight